Panasonic WVCU650 Operating Instructions - Page 31

UNIT SELECTION To control the system, you need to select a desired unit (system unit, recorder, monitor, or camera) at the beginning. ■ System Unit Selection Notes: • In advance, you need to set the unit number for each system unit. (Refer to the operating instructions of system units.) • 1 to 99 are available for the unit number. 1. Enter a unit number by pressing the numeric buttons. The entered number will appear on the LCD. Mon01 Cam016 ___16 F1 F2 F3 F4 2. Press the RECORDER/UNIT button while holding down the SHIFT button. The system will become ready for control. Then, the monitor number, camera number, and system unit number will appear on the LCD. Mon02 Cam016 Unit16 F1 F2 F3 F4 Notes: • Three seconds after, model number will appear in place of unit number. To display the unit number again, hold down the RECORDER/UNIT. Mon02 Cam016 HD316 F1 F2 F3 F4 • If you have entered a wrong unit number, "Invalid" will appear on the LCD. Then, the LCD will return to the status before the system unit selection. ■ Recorder Selection Notes: • In advance, you need to set HDD-unit maps. (Refer to p. 67 Associating Recorder Numbers with Unit Numbers.) • In the factory default, Recorder 1 to 16 is associated with Unit 1 to 16. 1. Enter a recorder number by pressing numeric buttons. The entered number will appear on the LCD. Mon02 Cam128 ____2 F1 F2 F3 F4 2. Press the RECORDER/UNIT button. The system will become ready for control, and the monitor number, camera number, and system unit number will appear on the LCD. Mon02 Cam016 Unit16 F1 F2 F3 F4 Notes: • Three seconds after, model number will appear in place of unit number. Mon02 Cam016 HD316 F1 F2 F3 F4 • If you have entered a wrong recorder number, "Invalid" will appear on the LCD. Then, the LCD will return to the status before the recording selection. Invalid Invalid 31