Panasonic WVCU650 Operating Instructions - Page 41

■ Preset Position Control Preset position is the function to register camera monitoring positions (preset positions) associated with position numbers. By entering the position numbers, you can move cameras to the preset positions. Note: To activate this function, you need to register the preset positions of combination camera. 1. Select a system unit, monitor, and desired camera. (Refer to p. 31 System Unit Selection, p. 32 Monitor Selection, and p. 32 Camera Selection.) 2. Enter a preset position number by pressing the numeric buttons. The entered number will appear on the LCD. Mon02 Cam001 ____3 F1 F2 F3 F4 3. Press the PRESET/PGM PRESET button. The camera will move to the registered preset position, and the preset position image will be displayed on an active monitor. Mon02 Cam001 Pre03 F1 F2 F3 F4 To register preset positions 1. Move the camera to a desired position by moving the 3D joystick. 2. Enter a preset position number you wish to register by pressing the numeric buttons. The entered number will appear on the LCD. Mon01 Cam001 ___12 F1 F2 F3 F4 3. Press the PRESET/PGM PRESET button while holding down the SHIFT button. The preset position will be registered, and "Memory" will appear on the LCD. Mon01 Cam001 Pre12 Memory Note: If the registration have failed, "Invalid" will appear on the LCD. (Example: When the selected camera does not support preset position control) Mon01 Cam001 Pre12 Invalid ■ Home Position Control Home position is the default preset position. You can move the camera to the home position only by pressing the PRESET/PGM PRESET button. Note: To activate this function, you need to register the home position of combination camera. (Refer to the operating instructions of combination camera.) 1. Select a system unit, monitor, and desired camera. (Refer to p. 31 System Unit Selection, p. 32 Monitor Selection, and p. 32 Camera Selection.) 2. Press the PRESET/PGM PRESET button. The camera will move to the registered home position, and the home position image will be displayed on an active monitor. Note: You can also move the camera to the home position by pressing the button 0, and then the PRESET/PGM PRESET button. ■ Camera Function Control You can recall the camera functions of combination cameras by entering the function number from this system controller. Refer to the operating instructions of combination camera for the association of camera numbers and functions. 1. Select a desired combination camera. (Refer to p. 32 Camera Selection.) 2. Enter a camera function number by pressing the numeric buttons. The entered number will appear on the LCD. Mon01 Cam001 ____3 F1 F2 F3 F4 3. Press the CAM FUNC/SYS FUNC button. The associated camera function will be activated. Note: If you assign camera functions to the joystick function buttons (A, B, and top buttons), you can recall the camera functions by pressing these buttons. Refer to p. 47 MENU FUNCTION DESCRIPTIONS for details. 41