Panasonic WVCU650 Operating Instructions - Page 29
Operation Start (Login), Login OK, Mon04 Cam128, Unit16, HD316, Invalid, PS Data Mode, No User
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
● Button Buzzer Setting You will perform the setting whether to activate a sound when a button is pressed. Select the desired parameter by rotating the JogDial. Buzzer Operation ON User ID __650 Notes: • To delete a character, press the CLEAR button. • You can also enter your user ID without pressing the CAM (SET) button. Notes: • OFF or ON is selectable. The factory default is ON. • If set to ON, short buzzer will sound three times in the following occasions. (p. 15) Invalid, Prohibited (p. 62) Level 1 Fixed ■ Operation Start (Login) Before starting operation, user authentication by the ID and password is required. (Refer to p. 62 for details on the setting of ID and password.) Notes: • User authentication is skipped when the auto login is set to ON. (Refer to p. 30.) • The factory default of operator information is as follows. • If no operation has been performed for 5 seconds or more, the LCD display will return to the login standby display. 5. Press the CAM (SET) button. When the ID number is correct, "Password" entry form appears on the LCD. User ID Password 650 _____ 6. Enter the password by pressing the numeric buttons. Then, press the CAM (SET) button. User ID Password 650 Notes: • To delete a character, press the CLEAR button. • The password will be displayed as ∗ marks. 7. When the password is correct, "Login OK" appears on the LCD. Then, the LCD changes to the operation display. Operator No. User ID 1 650 2 1 3 100 4 101 5 102 6 103 Password 650 12345 100 101 102 103 Function level Camera level 1 1 1 1 2 1 3 1 3 1 3 1 1. Turn on the power. (Refer to p. 27 Power-on and Poweroff.) 2. Wait until the login standby display appears. PS·Data Mode No User 3. Press the CAM (SET) button. "User ID" entry form will appear on the LCD. User ID _____ Login OK Mon04 Cam128 Unit16 F1 F2 F3 F4 Mon04 Cam128 HD316 F1 F2 F3 F4 Notes: • The smallest monitor, camera, and unit numbers are displayed on the LCD. • Three seconds after the unit number was determined, model number appears in place of unit number. • When the ID or password is wrong, "Invalid" blinks on the LCD. Then, the LCD returns to the login standby display. Invalid 4. Enter the ID number by pressing the numeric buttons. The user ID entered will appear on the LCD. PS • Data Mode No User 29