Panasonic WVCU650 Operating Instructions - Page 75
Problem, Check item and Remedy, Reference, Controller No.1 No Exist Error is dis - unit error
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Problem Buzzer sound is not heard. You cannot activate any functions even when pressing the A, B, or top button of the 3D joystick unit. Check item and Remedy The buzzer may be set to OFF. Check the setting. The cable may be disconnected from either the system controller and 3D joystick. Check the connection. Reference Refer to pp. 28 or 29. Refer to p. 17. Function assignment settings of the A, B or top button may be wrong. Check the settings. Refer to pp. 53 and 54. Users who have logged into the system may not be authorized to control cameras with these buttons. Check the user level settings of these users. Refer to pp. 62 to 65. "Controller No.1 No Exist Error" is displayed on the LCD. You cannot activate any functions even when pressing the function buttons (F1 to F4/F5 to F8). There may be no system controller set to CONTROLLER NO. 1. A system controller must be set to CONTROLLER NO.1. Check the CONTROLLER NO. switch at the rear panel of each system controller. Refer to p. 18. Function assignment settings of the F1 to F8 buttons may be wrong. Check the settings. Refer to pp. 52 to 54. Users who have logged into the system may not be authorized to control cameras with these buttons. Check the user level settings of these users. Refer to pp. 62 to 65. When pressing one of the function buttons (F1 to F4/F5 to F8), there is a difference between the function displayed on the LCD and that recalled actually. Function assignment settings of the F1 to F8 buttons may be wrong. Check the settings. Refer to pp. 52 to 54. The LCD title may have been edited wrongly. Check the setting. Refer to p. 68. There is an invalid button even when it is pressed. Can the selected monitor, camera, or - system unit activate the function assigned to the button? Depending on system devices, available functions will differ. Refer to the operating instructions of selected system unit. Users who have logged into the system may not be authorized to control cameras with the button. Check the user level settings of these users. Refer to pp. 62 to 65. Operation is suddenly discontinued while controlling system units. "ALM SUSPEND" indicator light up or goes out even when no system unit is controlled. The power cord insulation is damaged. The power cord and the power plug of the AC adapter are hot during use. There may be a user controlling system - units from another system controller. Check that no users are controlling other system controllers. The power cord or the plug is damaged. - If you continue to use it, a fire or an elec- tric shock may occur. Unplug the AC adapter immediately, and refer servicing to qualified service personnel. - The power cord gets warm or hot if bent or pulled during use. - 75