Panasonic WVCU650 Operating Instructions - Page 58
System Functions, Filtering ON/OFF, WJ-HD300 Series Only, Displaying Camera and Playback Image
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
● Filtering ON/OFF (WJ-HD300 Series Only) During the filtering playback, the searching filter will be temporarily canceled or recovered. 1. Display "HD300 Listed" sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.) HD300 Listed On Off F1 F2 F3 203 F4 2. Press the F2 button. The searching filter will be canceled, and "s" mark will light up beside "Off". HD300 Listed On Off F1 F2 F3 203 F4 Note: To recover the searching filter, press the F1 button. The searching filter will be recovered, and "s" mark will light up beside "On". ● Displaying Camera and Playback Image (WJ-HD500 Series Only) While camera images are being displayed in the multiscreen display, playback picture can be displayed on one of the multiscreen segments. (When the spot mode is activated for the camera image on the monitor, playback picture cannot be displayed.) Note: Refer to the operating instructions of recorder for details on this function. 1. Display "HD500 V-Multi" sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.) HD500 V-Multi 204 "Input Video CH" 2. Enter the channel number of camera whose playback picture you wish to display. The entered number will appear on the LCD. HD500 V-Multi ____5 "Enter F1 Button" Note: To cancel the numeric entry, press the CLEAR button. 3. Press the F1 button. • Playback picture will be displayed on the multiscreen monitor. • The specified camera channel will blink on the LCD for a few seconds, and the LCD display will return to Step 1. HD500 V-Multi 204 Video CH=__5 Note: To quit the playback on the multiscreen monitor, press the STOP button. ■ System Functions ● System Setup You can display the setup menu of selected system unit on the active monitor. Note: The details on the setup menu differ depending on system units. Refer to the operating instructions of system unit. 1. Display "System Setup" sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.) System Setup On Off F1 F2 F3 301 F4 2. Press the F1 button. The setup menu of selected system unit will appear on the active monitor, and "s" mark will light up beside "On". System Setup On Off F1 F2 F3 301 F4 3. Perform the camera setting while watching the setup menu on the monitor. 58