Panasonic WVCU650 Operating Instructions - Page 35
RECORDER CONTROL, Manual Recording, Playback, Search Playback
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
RECORDER CONTROL From this system controller, you can control digital disk recorders supporting PS·Data. You will control a recorder in the status in which a recorder has been selected. ■ Manual Recording 1. To start the recording, press the REC button. Recording will be started. Multiscreen display: Refer to p. 9 !7 Multiscreen selection button. Marking (WJ-HD300 Series only): Refer to p. 9 !85 Mark button. 4. To stop playback, press the STOP button. The playback will be stopped. 2. To stop the recording, press the REC button again for two seconds. Notes: Refer to the operating instructions of recorder for the available recording modes and total recording time. ■ Playback 1. Select a desired recorder. Refer to p. 31 Recorder Selection. 2. Select a camera whose picture you wish to play back. Refer to p. 32 Camera Selection. When camera selection is not necessary, skip to Step 3. 3. To start playback, press the PLAY/PAUSE button. The playback will be started. Note: The playback start point differs depending on recorders. (Refer to the operating instructions of recorder.) Operations available during playback Pause: Refer to p. 9 @5 Play/Pause button. Single frame skip (Forward or backward field advance): Refer to p. 9 @7 JogDial. Fast forward or fast reverse (Fast-forward or rewind): Refer to p.9 @7 Shuttle ring. Hold playback speed: Refer to p. 10 @8 Shuttle hold button. Skip (WJ-HD300 and WJ-HD500 Series): Refer to p. 9 @7 JogDial. Play the latest recorded image (WJ-HD300 Series only): Refer to p. 9 !5 Go to last button. ■ Search Playback Recorders have search playback functions based on recording times or recording events. When searching playback images, you can activate these functions from this system controller. Notes: • WJ-HD100 Series does not support search playback. • WJ-HD300 Ver. 1.2 or later / WJ-HD200 Ver. 1.24 or later / WJ-HD220 supports search playback. ● How to Display Search Lists 1. Press the SEARCH/T&D SEARCH button. "Search Mode" menu will appear on the LCD, and a search list (date-and-time entry form, record list, or recording event list, etc.) will be displayed on an active monitor. Search Mode HD300 Thumb Text Copy F1 F2 F3 F4 Example: WJ-HD300 Series Notes: • Every pressing the SEARCH/T&D SEARCH button can change search list display. (For example, Record list → Thumbnail Display → Record List ...) • The search list firstly displayed differs depending on recorders. 2. Perform operations while watching the active monitor. Note: The operation details differ depending on recorders. Refer to pp. 36 to 38. Controls commonly available Shuttle ring clockwise or counterclockwise: Changes the search list display. (For example, Record list ↔ Thumbnail Display ↔ Record List ...) JogDial clockwise or counterclockwise: Changes the selected parameter. Numeric buttons: Enters numeric parameters. 35