Panasonic WVCU650 Operating Instructions - Page 32

■ Monitor Selection When two or more monitors are connected to a system unit, you can select a desired monitor. When monitor selection is unavailable, "Mon- -" appears on the LCD. The selected system unit does not support monitor selection. 1. Select a system unit (including a recorder) connected to a monitor you wish to control. (Refer to p. 31 System Unit Selection.) Mon01 Cam016 HD316 F1 F2 F3 F4 2. Select the desired monitor number by pressing the numeric buttons. The entered number will appear on the LCD. Mon01 Cam016 ___16 F1 F2 F3 F4 Note: Refer to the operating instructions of system unit for available monitor numbers. 3. Press the MON (ESC) button. The monitor number will appear on the LCD. The system will become ready for monitor control. Mon02 Cam016 HD316 F1 F2 F3 F4 Note: If you have entered a wrong monitor number, "Invalid" will appear on the LCD. Then, the LCD will return to the status before the monitor selection. Mon02 Cam016 HD316 Invalid ■ Camera Selection When two or more cameras are connected to a system unit, you can select a desired camera. You will also perform camera selection when changing camera channels. 1. Select a system unit and monitor connected to a camera you wish to control. (Refer to p. 31 System Unit Selection and Monitor Selection in this page.) Mon01 Cam001 HD316 F1 F2 F3 F4 Note: If camera numbers are associated with unit numbers, you can skip system unit selection. (Refer to p. 66 Associating Camera Numbers with Unit Numbers.) 2. Select a camera number by pressing the numeric buttons. The entered number will appear on the LCD. Mon01 Cam001 ____16 F1 F2 F3 F4 Notes: • Refer to the operating instructions of system unit for available camera numbers. • You can also select cameras by pressing the + or - button. When pressing the + button, the monitor will display the image of camera with the higher channel number. When pressing the - button, the monitor will display the image of camera with the lower channel number. 3. Press the CAM (SET) button. The system will become ready for control. Then, the camera number will appear on the LCD, and the image of selected camera will be displayed on the active monitor. Mon01 Cam016 HD316 F1 F2 F3 F4 Note: If you have entered a wrong camera number (other than 1 to 999), "Invalid" will appear on the LCD. Then, the LCD will return to the status before selecting the camera. Mon01 Cam016 HD316 Invalid Signs displayed on the LCD "Seq": This sign is displayed when a sequence is activated. "Seq-P": This sign is displayed when a sequence is paused. "C-Pnnn*": This sign is displayed when a camera position is selected. (Camera position is the combination of camera number and preset position number.) * nnn is a camera position number. 32