Panasonic WVCU650 Operating Instructions - Page 49

● System Functions (SYS) System Setup LCD MENU SYS 301 System Setup You will open the setup menu of system unit and change the settings. SX150 OSD (WJ-SX150 Series only) LCD MENU SX150 OSD SYS 302 This function is reserved for future use. VLD History LCD MENU SYS 303 VLD History This function is reserved for future use. Mux VCR/CAM (Available if Video Multiplexer WJ-FS416 or Multiplexer Board WJ-SXB151 is Used in the System) LCD MENU SYS 304 Mux VCR/CAM You can activate either VCR playback or camera picture display on an active monitor. Mux Still (Available if Video Multiplexer WJFS416 or Multiplexer Board WJ-SXB151 is Used in the System) LCD MENU Mux Still SYS 305 You can activate either still or moving mode for display on the multiscreen monitor. ● Controller Camera Cleaning LCD MENU CNT 401 Camera Cleaning You will select the first and last camera channel to perform camera cleaning. Time & Date Type LCD MENU CNT 402 Time&Date Type You will set the time and date display pattern of time-anddate entry form. Auto Login LCD MENU CNT 403 Auto Login You will set operators who can log into the system automatically. Operator Setup LCD MENU CNT 404 Operator Setup • You will register a new operator. • You will change parameters of registered operators. Function Level LCD MENU CNT 405 Function Level You will change the function levels of operators. Camera Level LCD MENU CNT 406 Camera Level You will change the camera control levels of operators. Cam Posi Map LCD MENU CNT 407 Cam Posi Map You will register camera positions (the association of camera numbers and preset position numbers). 49