Panasonic WVCU650 Operating Instructions - Page 51

Camera +1 J/S MENU 510 Camera +1 The image of camera with the higher channel number will be displayed. Camera -1 J/S MENU 511 Camera -1 The image of camera with the lower channel number will be displayed. HD300 A-B Repeat (WJ-HD300 Series Only) J/S MENU 512 HD300 A-B Repeat • You will set the start and end points of A - B repeat playback of WJ-HD300 Series. • You will cancel A - B repeat playback of WJ-HD300 Series. HD500 Copy (WJ-HD500 Series Only) J/S MENU 513 HD500 Copy Recorded images will be copied from the built-in hard disk of recorder to external recording devices. HD200 Alarm Search (WJ-HD200 Series Only) J/S MENU 514 HD200 Alm Search The alarm search function of recorder will be activated. Multiscreen Display J/S MENU 515 Multi 4-Seg J/S MENU 516 Multi 7-Seg J/S MENU 517 Multi 9-Seg J/S MENU 518 Multi 10-Seg J/S MENU 519 Multi 13-Seg J/S MENU 520 Multi 16-Seg The screen of monitor connected to the selected system unit will be divided in multiscreen segments. Note: Available multiscreen segment patterns differ depending on system units. Refer to the operating instructions of system units. ■ To Recall Menu Functions You can recall menu functions as follows. 1. Select a system unit for which you wish to recall a function. (Refer to p. 31 System Unit Selection, p. 31 Recorder Selection, p. 32 Monitor Selection, or p. 32 Camera Selection.) Mon01 Cam016 HD316 F1 F2 F3 F4 Note: You can skip Step 2 and 3 if you know what function to recall. In this case, enter a function number, and press the MENU button. Then, go to Step 4. 2. Press the MENU button. "Camera Setup" main menu will appear on the LCD. LCD MENU CAM 101 Camera Setup 3. Select a desired function. Select a category (q) by rotating the shuttle ring. Then, select a function number (w) by rotating the JogDial. LCD MENU SYS 301 System Setup Note: Refer to pp. 48 to 51 for selectable functions. 51