Panasonic WVCU650 Operating Instructions - Page 22
Wait Time Setting, Parity Bit Setting, Stop Bit Setting, PS Data Com. Setup, Stop Bit 2, Wait Time Off
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4. Press the MON (ESC) button. The selected parameter will be determined, and the LCD display will return from the editing mode to the display mode. PS • Data Com. Setup Baud Rate 4800 3. Select a desired parameter by rotating the JogDial or pressing the + or - button. You can select the desired parameter from "1" (bit) and "2". The factory default is "1". PS • Data Com. Setup Stop Bit 2 ● Parity Bit Setting 1. Select "Parity Bit" by rotating the JogDial. (Refer to Step 5 in p. 21.) 2. Press the CAM (SET) button. The LCD display will change from the display mode to the editing mode. PS • Data Com. Setup Parity Bit None 3. Select a desired parameter by rotating the JogDial or pressing the + or - button. You can select the desired parameter from "None", "Odd", and "Even". The factory default is "None". PS • Data Com. Setup Parity Bit Even 4. Press the MON (ESC) button. The selected parameter will be determined, and the LCD display will return from the editing mode to the display mode. PS • Data Com. Setup Parity Bit Even ● Stop Bit Setting 1. Select "Stop Bit" by rotating the JogDial. (Refer to Step 5 in p. 21.) 2. Press the CAM (SET) button. The LCD display will change from the display mode to the editing mode. PS • Data Com. Setup Stop Bit 1 4. Press the MON (ESC) button. The selected parameter will be determined, and the LCD display will return from the editing mode to the display mode. PS • Data Com. Setup Stop Bit 2 ● Wait Time Setting 1. Select "Wait Time" by rotating the JogDial. (Refer to Step 5 in p. 21.) 2. Press the CAM (SET) button. The LCD display will change from the display mode to the editing mode. PS • Data Com. Setup Wait Time Off 3. Select a desired parameter by rotating the JogDial or pressing the + or - button. You can select the desired parameter from "Off", "100 (msec)", "200", "400", and "1000". PS • Data Com. Setup Wait Time 100 4. Press the MON (ESC) button. The LCD display will return from the editing mode to the display mode, and the selected parameter will be determined. PS • Data Com. Setup Wait Time 100 22