Pioneer AVH-X5600BHS Owner's Manual - Page 16

Section 08 SiriusXM tuner SiriusXM tuner 2 Use the numeric keypad to enter a new four-digit passcode and then touch the Enter key. Touch to confirm the passcode. Once the new passcode is set, the Parental Control screen will open. Note If Check Tuner displays instead, refer to SiriusXM Satellite Radio on page 57. Setting SiriusXM TuneStartä When tuning using the preset channel buttons, songs can play from the beginning if TuneStart is enabled. 1 Press the home button to switch to the home display. 2 Touch the system key to open the system menu. 3 Touch SiriusXM Tune Start on the system menu to turn SiriusXM Tune Start on or off. On: The current broadcast audio song is played back from the start of the song. Off: The live broadcast is played for the current audio channel. Scan options Channels and songs can be played back on this unit by scan play. TuneStart may take a few minutes to operate after a power cycle or after changing to another preset band. TuneScanä Scan through short previews of songs you may have missed on music channels stored on the current band of presets. 1 Touch the list key to display the preset channel list. 2 Touch Tune Scan. Each song in the current channel plays for eight seconds at a time. Refer to Scan play operations on page 16 for a list of functions that can be used during scan play. Note TuneScan is compatible with SXV200 or later tuner models. Not compatible with SXV100. Category scan Scan through each channel in a category. 1 Touch the search key. 2 Touch the desired category. 3 Touch Scan. The live broadcast for each channel in the current category plays for five seconds at a time. Refer to Scan play operations on page 16 for a list of functions that can be used during scan play. 16 En Scan play operations SiriusXM SXM 1 22 JAANM12:22 1 CH WWWWWWWWWWWWW 2 WWWWWWWWWWWWWWWW WWWWWWWWWWWWWWWW 3 WWWWWWWWWWWWWWWW 4 Scanning 5 CH 888 DB 6 Scan Play Scan Back Scan Next Scan Esc 1234 3 Touch the system key to open the system menu. 4 Touch SiriusXM Reset on the system menu. 5 Touch Reset. A Completed message will appear once the settings have been reset. # If you do not want to reset, touch Cancel. 1 Scan play key Selecting the channel or song playing 2 Scan back key Switching to the previous song during the TuneScan. Switching to the previous channel during the category scan. 3 Scan next key Switching to the next song during the TuneScan Switching to the next channel during the category scan 4 Scan escape key Quitting scan play Resetting to default The SiriusXM settings will be reset to the default settings. 1 Turn the source off. Refer to Turning the source ON/OFF on page 8. 2 Press the home button to switch to the home display.