Pioneer AVH-X5600BHS Owner's Manual - Page 56

Appendix Additional information Additional information Troubleshooting Symptoms are written in bold and causes in regular, non-indented text. Regular, indented text is used to indicate actions to be taken. Common The power will not turn on. The unit will not operate. Leads and connectors are incorrectly connected. Confirm once more that all connections are correct. The fuse is blown. Rectify the cause and then replace the fuse. Be sure to install a fuse with the same rating. Noise and/or other factors are causing the built-in microprocessor to operate incorrectly. Press RESET. (Page 48) Operation with the remote control is not possible. The unit does not operate correctly even when the appropriate remote control buttons are pressed. Battery power is low. Load a new battery. Some operations are prohibited with certain discs. Try operating with another disc. Playback is not possible. The disc is dirty. Clean the disc. The type of disc loaded cannot be played on this unit. Check the disc type. The disc loaded is not compatible with this video system. Change the disc to one that is compatible with your video system. There is no sound. The volume level will not rise. Cables are not connected correctly. Connect the cables correctly. The unit is performing still, slow motion or frame-byframe playback. There is no sound during still, slow motion or frame-by-frame playback. There is no image displayed. The parking brake cable is not connected. Connect the parking brake cable, and apply the parking brake. The parking brake is not applied. Connect the parking brake cable, and apply the parking brake. The icon is displayed, and operation is not possible. The operation is prohibited for the disc. This operation is not possible. The operation is not compatible with the configuration of the disc. This operation is not possible. The image displayed stops (pauses) and the unit cannot be operated. The data could no longer be read during playback. Stop playback once, and start playback again. There is no sound. The volume level is low. The volume level is low. Adjust the volume level. The attenuator is on. Turn the attenuator off. The sound and video skip. The unit is not firmly secured. Firmly secure the unit. 56 En File size and transmission rate are above recommended rates. Create a DivX file that is within the recommended size and transmission rate. The aspect ratio is incorrect and the image is stretched. The aspect ratio setting is incorrect for the display. Select the appropriate setting for your display. (Page 38) The motor sounds when the ignition switch is turned ON (or is turned to ACC). The unit is confirming whether or not a disc is loaded. This is a normal operation. Nothing is displayed. The touch panel keys cannot be used. The rear view camera is not connected. Connect a rear view camera. Camera Polarity is at incorrect setting. Press the home button to return to the source display and then select the correct setting for Camera Polarity. (Page 43) No xxxx appears when a display is changed (No Title, for example). There is no embedded text information. Switch the display or play another track/file. Subfolders cannot be played back. Folder repeat play has been selected. Select the repeat range again. The repeat range changes automatically. Another folder was selected during repeat play. Select the repeat range again. Track search or fast forward/reverse was performed during file repeat play. Select the repeat range again. DVD Playback is not possible. The loaded disc has a different region number from this unit. Replace the disc with one featuring the same region number as this unit. A parental lock message is displayed and playback is not possible. Parental lock is activated. Turn parental lock off or change the level. (Page 38) Parental lock cannot be canceled. The code number is incorrect. Enter the correct code number. (Page 38) You have forgotten your code number. Press RESET. (Page 48) Dialog language (and subtitle language) cannot be switched. The DVD being played does not feature multiple language recordings. The language cannot be switched if they are not recorded on the disc. You can only switch between items indicated in the disc menu. Switch the language using the disc menu. No subtitles are displayed. The DVD being played does not feature subtitles. Subtitles are not displayed if they are not recorded on the disc. You can only switch between items indicated in the disc menu. Switch the language using the disc menu.