Pioneer DVR-660H-S Operating Instructions - Page 114
Setting, Options, Explanation
UPC - 012562888897
View all Pioneer DVR-660H-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
16 The Initial Setup menu Setting Options Explanation VCR Plus+ CH Setting Next Screen Guide channels are used by the VCR Plus+ system so that the channel number specified in the VCR Plus+ programming numbers can be guaranteed to correspond to the correct station. Look in your TV guide to see which channel numbers should be assigned to which guide channels. • Use the / buttons to change the guide channel for setting. • Use the / buttons to change the channel number. • Use the PREV / NEXT button to display the previous/next 10 guide channels. • To return to the Initial Setup menu, press ENTER. Video Out Component Video Out Interlace • Select if your monitor/TV is not compatible with progressivescan video. Progressive Select if your monitor/TV is progressive-scan compatible. Check the operating instructions that came with your monitor/TV if you're not sure. • If your TV is incompatible with progressive scan video and you select Progressive, you will not be able to see any picture at all. In this case, press OPEN/CLOSE while holding down the (Stop) button on the front panel to switch to Interlace (this also switches Screen Resolution on page 119 to the default setting). • When the HDMI signal is output, no video is output from the COMPONENT VIDEO OUT. Audio In External Audio Stereo • Select if the audio from the currently selected external input is standard stereo. Dual Mono Select if each channel carries a separate soundtrack. When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder whether the audio is stereo or dual mono. This has priority over the setting you make here. Dual Mono L • Recording Select to record the left channel of an external dual mono source when recording to DVD in Video mode, to HDD with HDD Recording Format set to Video Mode On, or in LPCM mode. R As above, but for right channel recording. When recording dual mono audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback. 114 En