Pioneer DVR-660H-S Operating Instructions - Page 133
HDMI Control does not, respond, HDMI Control
UPC - 012562888897
View all Pioneer DVR-660H-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Additional information 17 Problem Remedy HDMI Control does not • Verify that the HDMI cable is firmly connected (page 22). respond • Check whether HDMI Control is set to On for this unit and the device connected to this unit. For more information, refer to the operating instructions of your Flat Panel TV or AV system. • Depending on the type of Flat Panel TV, some HDMI input terminals do not support the HDMI Control function. For details, see the operating instructions supplied with your Flat Panel TV. • HDMI Control may not operate properly if you do not use a High Speed HDMI cable. • This function may not work properly if you have multiple recorders connected to a single Flat Panel TV or AV system. For more information refer to the operating instructions of your Flat Panel TV or AV system. • Controls may not function properly in certain situations, such as immediately after you have connect an HDMI cable, turn this unit's power off or remove the power cable for this unit or the connected component. If you experience any problems, set HDMI Control to On for all connected units, and then display the pictures stored on this unit on your Flat Panel TV to improve the situations. • Check whether the connected component supports HDMI Control or not. • Certain functions are not supported on with Flat Panel TVs or AV system. • We cannot guarantee this unit will work with HDMI Control- compatible components other than those made by Pioneer. When using HDMI Control-compatible components manufactured by companies other than Pioneer, set the HDMI Control to Off (page 120). 133 En