Pioneer DVR-660H-S Operating Instructions - Page 115

The Initial Setup menu 16 Setting Options Explanation DV Input Stereo 1 • Select to use the 'live' audio track (recorded during the video shoot) from a camcorder that supports two stereo audio tracks. Stereo 2 Select to use the overdubbed audio track from a camcorder that supports two stereo audio tracks. Mix Select one of the three settings to use a mix of the two stereo audio tracks. Audio Out Dolby Digital Out Dolby Digital • Output a Dolby Digital signal when a Dolby Digital source is being played. Dolby Digital Convert Dolby Digital sources to Linear PCM output. Use if  PCM your connected equipment doesn't have a Dolby Digital decoder. DTS Out On • Output a DTS signal when a DTS source is being played. Off 96 kHz PCM Out 96 kHz  48 kHz • Switch off the digital output when a DTS source is being played. Use when your connected equipment doesn't have a DTS decoder. In this case, use the analog audio outputs. Convert 96 kHz digital audio sources to 48 kHz output. Use if your connected equipment doesn't support 96 kHz sampling rate. 96 kHz Output 96 kHz digital audio when a 96 kHz source is being played. MPEG Out MPEG MPEG  PCM • Output an MPEG audio signal when a source using MPEG audio is being played. Convert sources with MPEG audio to Linear PCM output. Use if your connected equipment doesn't have an MPEG audio decoder. Audio DRC On Switches on Audio DRC (Dynamic Range Control). Use when listening to Dolby Digital material at low volume. Off • Switches off Audio DRC. Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby Digital. Language OSD Language English • Français Sets the language of the on-screen displays to English. Sets the language of the on-screen displays to French. 115 En