Pioneer DVR-660H-S Operating Instructions - Page 48
Recording, Playing your recordings on, other DVD players
UPC - 012562888897
View all Pioneer DVR-660H-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
05 Recording The recorder will automatically switch on and start recording when the other component comes on. Recording stops when the external component switches off. • To cancel Auto Start Recording, press STANDBY/ON while the recorder is in standby. The AUTO indicator goes off. • To cancel Auto Start Recording once recording has already started, press REC for three seconds (this cancels Auto Start Recording, but recording continues), then F STOP REC to stop recording. • You can also stop recording by pressing F STOP REC then selecting Yes to confirm. Tip • Alternatively, with no OSD displayed, press and hold the front panel F STOP REC button for more than three seconds to switch Auto Start Recording on directly. After switching on, switch the recorder into standby. Additional information for cable/ satellite/STB (set-top box) users The following instructions show how to use the timer features of your STB with this recorder. Setting up 1 Connect the STB's audio/video outputs to a set of audio/video inputs on this recorder. 2 Switch on both the STB and this recorder and switch the recorder's input function to the STB (L1, L2 or L3). To check that everything is connected properly, switch on your TV and select this recorder as the video input. You should see whatever the STB is tuned to. 48 En 3 Program the IR controller supplied with your STB to send start/stop recording codes for a Pioneer VCR. See the manual that came with the STB for how to do this. Only the REC and STOP codes have any effect when used with this recorder: • REC - Start recording • STOP - Stop recording 4 Position the IR controller so that it will control this recorder. The IR sensor on the recorder is located just above the mark on the front panel. Making a timer recording 1 Set the timer on the STB. See the manual that came with your STB for how to do this. 2 Switch on this recorder. You must leave the recorder on until the recording finishes. • At the programmed times, the STB will start and stop recording on this recorder. Playing your recordings on other DVD players DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM Most regular DVD players can play finalized discs recorded in DVD-R/-RW (Video mode) and DVD+R discs. A number of players (including many Pioneer models) can also play DVD-RW discs recorded in VR mode, finalized or not. Most players will not play VR mode DVD-R discs, although some DVD-ROM drives and DVD recorders may be able to (finalization might be necessary). DVD-RAM discs can only be played on DVD-RAM compatible players. Check the manual that came with the player to check what kinds of discs it will play. When you finalize a DVD-R/-RW (Video mode) or DVD+R disc, a title menu is created from which you can select titles