Pioneer DVR-660H-S Operating Instructions - Page 132
Your Flat Panel TV
UPC - 012562888897
View all Pioneer DVR-660H-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
17 Additional information HDMI Problem Remedy The connected HDMI or • Try disconnecting then reconnecting the HDMI cable (while the DVI device does not power of both components is on). display any picture • Try switching the power of the HDMI/DVI device off then back on. (and the front panel • Try switching off the HDMI/DVI device and this recorder. Next, switch HDMI indicator does on the HDMI/DVI device and leave it for around 30 seconds, then not light) switch on this recorder. • When you connect an HDMI-compatible device make sure of the following: - The connected device's video input is set correctly for this unit. - The cable you're using is fully HDMI-compliant. Using a non- standard cable may result in no picture being output. - Don't use several HDMI cables connected together. Use a single cable to connect devices together. • When you connect a DVI-compatible device make sure of the following: - The connected device's video input is set correctly for this unit. - The DVI terminal on the connected device is HDCP-compatible. - The connected device is compatible with NTSC (720 x 480i/p, 1280 x 720p, 1920 x 1080i/p) video input. • If the recorder's internal HDD is damaged or broken, there will be no HDMI output. • Not all HDCP-compatible DVI devices will work with this recorder. No video from the HDMI output • If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case, press OPEN/CLOSE while holding down the (Stop) button on the front panel to switch the setting (this also switches Component Video Out on page 114 to the default setting). There's no sound from • There is no sound when using a DVI terminal. the connected HDMI or • Some HDMI-compatible devices do not output sound (check with DVI device the manual that came with the connected device). The power • This unit's power may be turned on when you control this unit from a automatically turns on connected Flat Panel TV. If you do not want this unit to be turned on in this way, set this unit's HDMI Control to Off (page 120). The power • This unit's power may be turned off when you control this unit from a automatically turns off connected Flat Panel TV. If you do not want this unit to be turned off in this way, set this unit's HDMI Control to Off (page 120). Your Flat Panel TV and • The connected Flat Panel TV or AV system (amplifier or AV receiver AV system etc.) automatically may change inputs in response to this unit starting automatically change playback or having the GUI screen (ex. Disc Navigator) displayed. If inputs you do not want your Flat Panel TV and AV system to change inputs in this way, set this unit's HDMI Control to Off (page 120). 132 En