Pioneer DVR-660H-S Operating Instructions - Page 61

Playback 06 Check the disc packaging for details of the soundtrack options. AUDIO • Change the audio soundtrack. The current audio language is shown on- screen and in the front panel display. • The sound may drop out for a few seconds when switching soundtracks. • Some discs feature both Dolby Digital and DTS soundtracks. There is no analog audio output when DTS is selected. To listen to the DTS soundtrack, connect this recorder to a DTS decoder or AV amp/receiver with built-in DTS decoder via the digital output. See Connecting to an AV amplifier/receiver on page 21 for connection details. Switching audio channels CD Video CD WMA/MP3 MPEG-4 AAC Stereo - Stereo (default) 1/L - Left channel only 2/R - Right channel only Switching camera angles DVD-Video Some DVD-Video discs feature scenes shot from two or more angles - check the disc box for details: it should be marked with a icon if it contains multi-angle scenes. When a multi-angle scene is playing, the same icon appears on screen to let you know that other angles are available (this can be switched off if you prefer - see Angle Indicator on page 119). DVD (VR) DVD-RAM HDD CD Video CD WMA/MP3 MPEG-4 AAC For HDD1 and VR mode content that has both a main and a SAP (Secondary Audio Programme) audio channels, you can switch between main (L), SAP (R), or both (L+R).2 When playing Video CDs and Audio CDs you can switch between stereo, just the left channel or just the right channel. ANGLE • Switch the camera angle. • The angle number is displayed onscreen. • If the disc was paused, playback starts again with the new angle. Displaying disc information on-screen AUDIO • Press repeatedly to display/ switch the audio channel. The audio channel(s) currently playing are indicated on-screen. HDD DVD (VR) DVD-RAM L+R - Both channels (default) L - Left/main channel only R - Right/SAP channel only You can display various on-screen information about the disc loaded or the HDD. DISPLAY • Display/change the on-screen information. • Press once to show the HDD and removable disc (DVD, etc.) activity together. Press again to show the status of just the currently selected playback/ recording device (HDD or removable disc). • To hide the information display, press DISPLAY repeatedly until it disappears. Note 1 Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 118). 2 When playing a dual mono recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot switch the audio channel. Set Dolby Digital Out to Dolby Digital  PCM (see Dolby Digital Out on page 115) or listen via the analog outputs if you need to switch the audio channel. 61 En