Pioneer DVR-660H-S Operating Instructions - Page 130

17 Additional information Problem Remedy Can't play a disc recorded using this recorder on another player • If the disc was recorded in DVD-R/-RW (Video mode) or DVD+R, make sure that it's finalized (page 49). • Some players will not play recordable DVD discs, even when recorded in DVD-R/-RW (Video mode) or DVD+R and finalized. • If the disc was recorded in VR mode, the other player must be specifically RW compatible in order to play it (page 8). • Discs recorded with copy-once material cannot be played on nonCPRM compatible players (page 36). • DVD+RW discs containing only a small amount of recorded material may not play on other players. Finalize the disc and try again. • DVD-RAM discs can only be played on DVD-RAM compatible players. A DVD+R/+RW recorded using this unit cannot be subjected to time search in other equipment • Time search may be unavailable with certain equipment. Can't record or does not record successfully • Check that there is some remaining blank space on the DVD/HDD. • For a DVD-R/-RW (Video mode) or DVD+R, check that the disc isn't already finalized. • Check the limits on the number of titles and chapters on a disc: - HDD: 999 titles - VR mode: 99 titles, 999 chapters per disc - Video mode disc: 99 titles per disc, 99 chapters per title - DVD+R/+RW: 49 titles per disc, 99 chapters per title (max 254 chapters per disc) • Check that the source you are trying to record is not copy protected. • For a VR formatted disc, check that the disc isn't locked (page 107). • The power may have failed during recording. Timer programme doesn't record successfully • When setting the recording channel, make sure you set the recorder's built-in TV tuner, not the TV's built-in tuner. • When recording to a DVD-R/-RW (Video mode) or DVD+R/+RW, programmes that are copy-once protected cannot be recorded. Use a VR mode formatted disc for copy-once material (page 36). • Two timer programmes may have overlapped, in which case only the earlier one will record completely. • The power may have failed during recording. After briefly • A backup battery inside the recorder keeps the clock and other unplugging or after a settings from being reset when there is no power to the recorder. After power failure the front unplugging or a power failure, the battery keeps all settings for some panel display shows five years from the date it was shipped from the factory. Reset the '--:--' clock and other recorder settings to use the recorder again. • To have the battery replaced, please ask your nearest Pioneer- authorized service center or your dealer to carry out repairs. 130 En