Pioneer DVR-660H-S Operating Instructions - Page 25
Wma/mp3/mpeg-4 Aac
UPC - 012562888897
View all Pioneer DVR-660H-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connections 02 • When connecting a PC to this unit, make sure the power is turned off on both the PC and this unit when you connect them via USB. • We recommend connecting USB devices when this recorder is switched off (in standby). • We recommend USB cables 2 meters in length or shorter. Connecting an HDD camcorder On the recorder's HDD, video files can only be copied with the signal format shown below. • Video recording format: MPEG-2 (PS) • Image resolution: 720 x 480, 704 x 480, 352 x 480, 352 x 240 • Audio recording format: Dolby Digital • Use a USB cable (supplied with an HDD camcorder) to connect the USB port of your HDD camcorder to the front panel USB port of this recorder. HDD camcorder with which operation is guaranteed (According to our survey) • SONY DCR-SR300, DCR-SR62 JPEG file storage devices • Digital still camera • Memory card reader (any type of memory card) • USB memory • PC (Use Connect PC function) The Picture Transfer Protocol (PTP) can be used to transfer up to a maximum of 4000 files. WMA/MP3/MPEG-4 AAC1 file storage devices • Memory card reader (any type of memory card) • USB memory • PC (Use Connect PC function) Note that although multi-slot card readers can be used, the recorder will only recognize the first card inserted. To read another card, remove all the cards and insert the card to be read again. Using a USB hub • Use a hub compatible with USB 1.1 and/ or 2.0. • Use an independently powered hub (bus powered hubs may not work reliably). • In the event of unreliable operation with the hub, we recommend plugging the device directly into the recorder's USB port. • Operation may become unreliable if too many devices are connected to the hub. In this case, try unplugging some devices. • If the power delivered through a hub is insufficient for the devices connected, communication can become unreliable. In this case, disconnect one or more devices then perform a USB restart. (See Restart USB Device on page 122.) Using a USB printer • Use a PictBridge-compatible printer. Using a USB keyboard • Do not use a PS/2 keyboard connected using a PS/2-USB adapter. Using a PC • Note that you can connect a PC to this device via USB to copy WMA/MP3/ MPEG-4 AAC1, JPEG and DivX files. For more information, see Copying files from a PC (Connect PC) on page 102. To use Note 1 The MPEG-4 AAC files can be played or copied only with the DVR-660H-K. 25 En