Pioneer DVR-660H-S Operating Instructions - Page 43

Recording 05 3 Enter the timer recording settings. Use the / buttons to select a field; use the / buttons to change the value. • CH - Choose a channel (2 to 69 for antenna channels; 1 to 125 for cable, excluding skip channels), or one of the external inputs from which to record. • Date - Choose a date up to one month in advance, or select a daily or weekly programme. • Start - Set the recording start time. • Stop - Set the recording end time (maximum length of a timer recording is 24 hours). • Extend - Extend the end time of the timer recording (select Off, 30, 60, 90 or 120 mins). 4 If you want to change the recording mode, recording destination, etc., select 'Set Detailed'. In this area you can set: Record to - Select HDD for hard disk recording or DVD for DVD recording. Select HDD for Auto Replace Recording (daily or weekly timer recording only). Recording Mode - Select XP, SP, LP, EP, SLP or SEP, (See Setting the picture quality/ recording time on page 37). If Manual Recording is on, then you can also select the LPCM setting, XP+ or MN (press ENTER then use the / buttons to select the level). Auto Replace Rec. - Automatically erases the previous daily or weekly recording when the next one is recorded. Genre - Select a record genre (for HDD recording only). Dual Mono Recording - Select which channel of a dual mono broadcast to record (necessary if recording to a Video mode DVD or to the HDD with the HDD Recording Format set to Video Mode On). HDD Recording Format - Select Video Mode On or Video Mode Off depending on whether you need high-speed copying to Video mode DVD capability or not. 5 After entering all the timer recording information, highlight 'Store Programme' and press ENTER. The timer recording list screen is displayed again. The timer programme you just input appears in the list. The rightmost column shows various timer recording status messages: • OK - Can be recorded. • Time Over - Not enough space on the HDD (the recording won't finish). • Over 12h - Recording time of over 12 hours set (when recording to the HDD the recording will be split into two titles). • Overlap - Two timer programmes partially or completely overlap. The one starting earlier will take priority. • Until ... (e.g., Until 8/13) - For a regular recording, the last programme that could be recorded is shown. • Data Over -Can't record because the disc management area of the disc is full. • Cancel Once - A regular timer programme is set to skip. • Can't Rec - Not possible to record. • Title Over - Can't record because there is already the maximum number of titles on the disc (HDD: 999; DVD: 99). • Recording - The programme is currently recording. • Standby - The recorder is in timer recording standby. • nothing displayed - Another timer recording or copying is in progress. 6 To exit the timer recording screen, press HOME MENU. Tip • To enter a title name for the timer recording in advance, select Set Title Name and follow the on-screen display. 43 En