Pioneer DVR-660H-S Operating Instructions - Page 121
Auto DNS Address Get - dvr service manual
UPC - 012562888897
View all Pioneer DVR-660H-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
The Initial Setup menu 16 Setting Options Explanation Network (DVR-660H-K only) IP Config. Next Screen Set Auto Set IP Address to On. If there is a DHCP (Dynamic Host Configuration Protocol) server on the local area network (LAN), this recorder will automatically be allocated an IP address. If you're using a broadband router or broadband modem that has a DHCP server function, select On. The IP address will automatically be determined. If there is no DHCP server on the network and you select On, this recorder will use its own Auto IP function to determine the IP address. Set Auto DNS Address Get to On. If the DHCP function can be used with a broadband router or a broadband modem equipped with a router function, the DNS (Domain Name System) server address can normally be set automatically. • If you want to set the IP address manually, Set Auto Set IP Address to Off then set the IP address, Subnet mask and Default gateway: Use the / buttons to select the address, press ENTER, use the / buttons to select a field; use the number buttons to enter a value. Select Set, then press ENTER. • The IP address determined by the Auto IP function is 169.254.X.X. The functions for searching for titles in the Gracenote database on the network and the Connect PC function with an Ethernet connection cannot be used if the IP address is set for the Auto IP function. • When inputting the IP address, set within the range shown below. The functions for searching for titles in the Gracenote database on the network and the Connect PC function with an Ethernet connection cannot be used if other IP addresses are set. - CLASS A: 10.0.0.1 to 10.255.255.254 - CLASS B: 172.16.0.1 to 172.31.255.254 - CLASS C: 192.168.0.1 to 192.168.255.254 • For information on DHCP refer to the network device's operating instructions. •You may need to contact your service provider or network administrator when manually entering an IP address. • If you want to set the DNS address manually, Set Auto DNS Address Get to Off then set the DNS (Primary) and DNS (Secondary). • When Auto Set IP Address is set to Off, Auto DNS Address Get is also set to Off. Proxy Server Config. Next Screen Only set the proxy if so instructed by your provider. Set Proxy Server to On then set the IP address or Server name and Port number. Display Network Next Screen A list of network settings is displayed. Config. Test Start Connection to the network is tested. The result of the test is displayed. If Connection failed. is displayed, check the IP Config. and Proxy Server Config. settings. Options On Screen Display On • The recorder displays operation displays (Stop, Play, etc.) on-screen. Off Switches off the on-screen operation displays. 121 En