Pioneer DVR-660H-S Operating Instructions - Page 134

17 Additional information Network (DVR-660H-K only) Problem Cannot connect to network Remedy • Turn this unit's power off and on again. • Check that the LAN cable is properly connected. • Check that the router's power is turned on. The Connect PC • Check that the IP address is properly set. function does not work • Either turn the router's DHCP server function on or change the properly with an Network settings according to the environment (page 121). Ethernet connection • On the PC, click 'Start', 'Network', and then 'Network and Sharing Center' on the command bar. When the 'Network and Sharing Center' window appears, ensure that 'Network discovery' under the 'Sharing and Discovery' section is enabled. • From 'Network' on the PC, right-click the 'Pioneer.HDD/DVD- Recorder' icon and select 'Uninstall'. A comfirmation message may appear. In this case, press 'Continue'. Wait at least 30 seconds, then reconnect the PC using the procedure described at Ethernet connection on page 102. • Normal operation may be unavailable if the connected equipment has Internet security software installed in it. If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions. If the picture freezes and the front panel and remote control buttons stop working • Press  (Stop) then try restarting playback. • Press the front panel  STANDBY/ON button to switch the power off, then switch back on and restart playback. If the power fails to switch off, press and hold  STANDBY/ON for five seconds until the power switches off. STANDBY/ON STANDBY/ON DV IN HDD/DVD HDD DVD USB OPEN/CLOSE STOP REC CH INPUT SELECT 134 En