Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 177

/Position A key that indicates the placement of the staples, using the settings displayed in Table 18. The > setpagedevice } { >> setpagedevice } This example indicates that the printer will place a punch on the left side of a page, whether the page has either a Portrait or a Landscape orientation. /Punch 4 The key that introduces the PunchDetails Dictionary. /Type 7 A required key reserved for future use. /Pattern 0 A key that indicates the default punch setting, using the settings displayed in Table 21 on page 165. Note: Most PostScript drivers use /Pattern 0 because Finishers tend to have one particular setting. /Pattern 0 works with all Finishers. If you specify /Pattern 6 in the PostScript driver and your Finisher only supports two-hole punch, InfoPrint Manager will print the job and generate an error message without performing the finishing. /Position A key that indicates the placement of the staples, using the settings displayed in Table 20 on page 164. Table 17. Default staple locations Staple Key name PostScript Staple Do not staple None /Staple 0 Staple Not supported /Staple 3 Table 18. Additional PostScript staple details Staple details Key name PostScript staple details Do not staple None Portrait: /Position 0 Landscape: /Position 0 Single left diagonal LeftDiagonal Portrait: /Position 1 Landscape: /Position 5 Single left horizontal LeftHorizontal Portrait: /Position 3 Landscape: /Position 7 Chapter 15. Working with transforms 163