Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 38
Limitations of actual screen frequencies and angles on InfoPrint 4000 and 4100 printers
View all Ricoh InfoPrint Pro C900AFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
1. Edit the /etc/hosts file with your AIX editor of choice. 2. Insert the printer's IP address in a line as shown below: xx.xx.xx.xx printer # ethernet name/address where xx.xx.xx.xx is the IP address of the printer control unit that is to display the InfoPrint Manager Operations GUI, and printer is a printer host name that is unique to your network. Note: If you have multiple Enhanced Operator Consoles that can display the InfoPrint Manager Operations GUI, the /etc/hosts file must contain the IP address for each printer control unit. Limitations of actual screen frequencies and angles on InfoPrint 4000 and 4100 printers If you change the version of toner used with your printer, you should recalibrate all customized calibration curves to make sure that they print correctly. The screen frequencies shown in this section presume the use of a 600 dots per inch (DPI) printer. Frequencies at other DPI are proportionally lower. For example, an 85 lines per inch (LPI) screen used on a 300 DPI printer will be 43 LPI. Screen frequencies match the requested screen frequency as closely as possible, based on constraints of the halftone design. For the actual screen frequencies and angles for both InfoPrint 4000 and InfoPrint 4100 printers, see Table 3, Table 4, Table 5, and Table 6. | Table 3. Screen Frequencies for InfoPrint 4000 IR3/IR4 and ID5/ID6 and InfoPrint 4100 | HD3/HD4 and HS2 printers with Version 3 or 7 Toner | Submit Screen Frequency (LPI) 71 85 106 141 | Actual screen frequency (LPI) 74 85 96 117 | Actual Screen Angle (Default ° 35.5° 45° 51.3 ° 59° | Set) | Actual Screen Angle (90° Set) 54.5° 45° 38.7° 31° | Table 4. Screen Frequencies for InfoPrint 4000 IR3/IR4 and ID5/ID6 and InfoPrint 4100 HD1/HD2, HD5/HD6, PD1/PD2, HS1, HS3, and PS1 printers with Version 2 (enhanced printing toner) or Standard Toner Submit Screen Frequency (LPI) 71 85 106 141 Actual screen frequency (LPI) 71 85 103 141 Actual Screen Angle 45° 45° 31° 45° Table 5. Screen Frequencies for InfoPrint 4000 IR1/IR2 printers with Version 2, 3, or Standard Toner Submit Screen Frequency (LPI) 71 85 106 141 Actual screen frequency (LPI) 71 83 106 141 Actual Screen Angle 45° 34° 45° 45° | Table 6. Screen Frequencies for InfoPrint 4100 TD1-2 printer with Version 2 Toner and | InfoPrint 4100 TS1, TS2, TS3, TD3-4, TD5-6 printers with Version 7 Toner | Submit Screen Frequency (LPI) 71 85 106 141 | Actual screen frequency (LPI) 74 85 96 117 24 InfoPrint Manager for AIX: Procedures