Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 340
Setting up finishing options for PS/PCL printers
View all Ricoh InfoPrint Pro C900AFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
Setting up finishing options for PS/PCL printers Depending on the printer model, you can set up several finishing options. InfoPrint Manager can be set up to support many of these possibilities, including edge stitching (stapling one edge of the print job to create a booklet), saddle stitch (stapling in the middle of the page to create a folded booklet), and corner stapling. These sections describe how to set up finishing options for printers that can be sent PostScript and PCL, including the InfoPrint 70, InfoPrint 2085, and InfoPrint 2105. Telling InfoPrint Manager what options the finisher supports The first step in enabling the finishing options is to let InfoPrint Manager know what options the finisher supports. Follow the steps below to set the appropriate values. Note: For the InfoPrint 70, InfoPrint 2060ES, InfoPrint 2075ES, InfoPrint 2085, InfoPrint 2090ES, InfoPrint 2105, and InfoPrint 2105ES, the PSF DSS sets default values for the job-finishings-supported attribute, so you do not need to do this setup process for the actual destination. These are the default settings: InfoPrint 70 staple-top-left, staple-bottom-left, staple-top-right, edge-stitch InfoPrint 2085, InfoPrint 2105 staple-top-left, staple-bottom-left, staple-top-right, edge-stitch, edge-stitch-left InfoPrint 2060ES, InfoPrint 2075ES, and InfoPrint 2090ES staple-top-left, staple-bottom-left, edge-stitch, edge-stitch-left, saddle-stitch InfoPrint 2105ES staple-top-left, staple-bottom-left, edge-stitch, edge-stitch-left 1. Start the InfoPrint Manager Administration GUI. 2. Find or create the PSF printer (actual destination) that sends jobs to the printer you are setting up. 3. Right-click the printer and select Properties from the pop-up menu. 4. In the Printer Properties notebook, click the Job tab. 5. Find the Finishing options allowed field. Note: If you do not see the Finishing options allowed field, click Show More. 6. Select all of the finishing options that your finisher supports in the Possible values list and add them to the Values list. 7. Click OK. Setting up InfoPrint Manager and clients to use finishing options How you set up to use finishing options varies depending upon what kind of print jobs you create and how you submit them. There are several categories; find the one below that most resembles your situation. Using the pdpr command When you submit print jobs from the command line with the pdpr command, you can use the job-finishing attribute on the -x flag to specify finishing options. For example: pdpr -d printername -x"job-finishing=staple-top-left" printfilename 326 InfoPrint Manager for AIX: Procedures