Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 33
Logging accounting information, Troubleshooting, Configuring as TCP/IP printers to use Booklet Maker
View all Ricoh InfoPrint Pro C900AFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Logging accounting information The wait-for-job-completion attribute (Report job completed when printed label on the InfoPrint Manager Administration GUI) indicates whether InfoPrint Manager for AIX: v Waits for the job to print completely before reporting the job as completed (Yes). v Reports the job as completed as soon as all the data has been sent to the printer (No). If this attribute is set to No, InfoPrint Manager will log the number of pages submitted, regardless of whether they printed or not. If the wait-for-job-completion attribute is set to Yes and you are using Send and Save options 1 through 5 or 7, 0 pages will be logged as having printed, regardless of whether they print or not. If you are using the 0 Print now (Default) option or the 6 Print Now and Archive to Document Server option, InfoPrint Manager will log the actual number of pages printed. To change this attribute from the InfoPrint Manager Administration GUI: 1. Select Printer → Properties. 2. Select the Job tab. 3. If the Report job completed when printed radio button does not appear at the bottom of the window, click Show more. Troubleshooting If an AIX DSS printer is not waiting long enough to show a successfully-printed job in the Job Management Information Base (MIB), you can configure settings on the actual destination so it does not time out. First, make sure that the wait-for-job-completion attribute (Report job completed when printed field on the Job tab of the Printer Properties notebook) is set to Yes. Then, you can use the following procedure to set wait-for-job-completion-snmp-timeout (Report job completed when printed timeout (sec) field on SNMP tab of the Printer Properties notebook) so that it will not time out as quickly. 1. From the main window of the InfoPrint Manager Administration GUI, select the InfoPrint 2090ES, InfoPrint 2105ES, InfoPrint 2060ES, InfoPrint 2075ES, InfoPrint 2085, or InfoPrint 2105 actual destination. 2. Click Printer → Properties. 3. Click the SNMP tab. 4. Enter a higher value in the Report job completed when printed timeout (sec) field. 5. Click OK or Apply. Note: Increasing this value will increase the amount of time it takes to report that a job has failed. If you decrease this value, you might get false failures. Configuring as TCP/IP printers to use Booklet Maker If you are interested in using the Booklet Maker function, you must configure these printers as PSF TCP/IP printers. To pass data streams through InfoPrint Manager to the printer without transforming them, complete these steps: Chapter 2. Installing and configuring printer devices and related hardware 19