Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 19
Shutting down a server, PD_SOCKET, Start/Stop Servers, Stop a Server, SERVER name, Enter, Notes
View all Ricoh InfoPrint Pro C900AFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
These InfoPrint Manager servers do not need to contain any InfoPrint Manager objects, such as queues or destinations. Instead, these servers handle the locale-specific processing of the commands and forward those commands to the InfoPrint Manager server that contains the objects. For each InfoPrint client that is not running on the same AIX server as the InfoPrint AIX servers, such as the InfoPrint Manager Operations GUI, InfoPrint Submit Express, JobTicketer, or InfoPrint Select, you must make sure that it connects to the correct InfoPrint server by setting the PD_SOCKET environment variable to contain the port number of the InfoPrint AIX server supporting the locale of your client. If your client is running in a locale not supported by the InfoPrint server then connect it to an InfoPrint server running in English. To do this task, see Chapter 12, "Setting InfoPrint Manager and AIX environment variables," on page 133. Shutting down a server You can shut down a server immediately or after it finishes processing some or all of its current jobs. InfoPrint prevents the server from accepting new jobs while the server is shutting down and after it has shut down. Logical destinations and actual destinations in the server that were enabled at shut down time are enabled when the server is restarted. Logical destinations and actual destinations in the server that were disabled at shut down time are disabled when the server is restarted. Note: See "Creating additional servers or starting existing servers" on page 4 for the restart procedure. You can shut down an existing server through the InfoPrint SMIT administrator's interface. If you are not familiar with how to start the InfoPrint SMIT administrator's interface, see "Using the InfoPrint Interfaces" in InfoPrint Manager for AIX: Installation Instructions. To shut down an existing server: 1. From the InfoPrint Printing System panel, click Start/Stop Servers. A new menu displays. 2. Click Stop a Server. The Stop a Server dialog window opens. 3. Enter the name of the InfoPrint server in the * SERVER name field. By default, InfoPrint fills in this field with the name of the AIX system on which you are running the SMIT session. 4. Press Enter. The result of this step depends on whether the server is running: v If the server is currently running, InfoPrint issues a message when it successfully stops the server. v If the server is not running, InfoPrint issues a message to indicate that the server is not operational. Notes: 1. Normally you will only run one InfoPrint server on an AIX system. 2. You also use this procedure to start a server that you have shut down. Chapter 1. Creating and managing servers 5