Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 355
Resuming the actual destination
View all Ricoh InfoPrint Pro C900AFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 355 highlights
5. Click OK. The actual destination stops printing, and the jobs processing on the actual destination stay in the same state until the actual destination starts again.. Resuming the actual destination To resume the actual destination: v In the GUI, right-click the actual destination and select the Resume action. v Select the actual destination and left-click the icon on the toolbar. Interrupting and restarting a job that is currently printing on an InfoPrint 4000/4100 Use this procedure: v If you want to interrupt the job that is currently printing and start printing it again v If you want to interrupt the job that is currently printing, print another job, and then start the job that you interrupted. v If you want to interrupt the job that is currently printing, move the job to a different printer, and start printing the job again. This procedure does NOT stop the printer; it only stops the job that is currently printing. Other jobs continue to print on this printer. Once the job is stopped, the next job in the queue will start to print. If you need to stop the printer (for example, to replace toner), use the procedure . Note: Refer to the online help in the InfoPrint Manager GUI if you need instructions on completing any of these steps. When you use the "Interrupting a job that is currently printing" procedure, the job fills a physical sheet, stops, and prints a message after the last page indicating the number of the last (AFP) page printed. The job shows on the GUI as Paused. When the job restarts, it starts on the next page of the job in the next logical partition. InfoPrint Manager prints a message at the end of the restarted section of the job indicating the page on which the printing started. You might want to use this procedure if you are printing a very long job, and you need to print another, more urgent job immediately. Interrupting a job that is currently printing 1. Open the InfoPrint Manager Operations GUI or the InfoPrint Manager Administration GUI. 2. In the GUI, find the printer where the currently printing job is, and select it. 3. Right-click the printer, and select Interrupt Printing Job or left-click the printer and then left-click the icon on the toolbar. Note: If the Interrupt Printing Job action does not appear on the Printer menu or toolbar, use the Customize dialog to add the action. 4. Choose from these options: v Select Now to interrupt the job as soon as possible Chapter 34. Other procedures 341