Samsung SM-P600 User Manual Generic Wireless Sm-p600 Galaxy Note 10.1 Jb Engli - Page 102
Scan and Connect to a Wi-Fi Network, Add a Wi-Fi Network Manually, Wi-Fi, Settings, Connections
View all Samsung SM-P600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Scan and Connect to a Wi-Fi Network When you turn on Wi-Fi, your device searches for and displays available Wi-Fi connections. 1. From any screen, touch the top of the screen and swipe downward. The Notification Panel displays. 2. Touch Wi-Fi to turn Wi-Fi on (green). Your device begins scanning for available Wireless Access Points. Note: To begin a new scan for available WAPs, touch Scan. 3. When the scan is complete, touch a Wi-Fi network to connect. If the Wi-Fi network is open (unsecured), your device automatically connects. If the Wi-Fi network is secured, enter the password at the prompt to connect. Tip: You can have your device automatically notify you of available networks. See Network notification under "Settings" on page 99. Add a Wi-Fi Network Manually 1. From a Home screen, touch Apps ➔ Settings ➔ Connections tab. 2. Touch the OFF/ON button to turn Wi-Fi ON . 3. Touch Wi-Fi ➔ Add Wi-Fi network and enter the following: • Network SSID: Enter the name of the Wi-Fi Wireless Access Point (WAP). • Security: Select the type of security used by the WAP. Note: Depending on the security protocol used by the WAP, additional network information may be required, such as a password. • Password: If the WAP is secured, enter the password or hex key. 4. Touch Connect. Note: When Wi-Fi is on, is displayed on the Status bar. 98