Sony DCR-TRV460 Camera Operations Guide - Page 15
Getting started, After charging the battery, To remove the battery pack
UPC - 027242643116
View all Sony DCR-TRV460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
6 Slide the POWER switch up to (CHG) OFF. The CHG (charge) lamp lights up and charging starts. To check the remaining battery - Battery Info DSPL/BATT INFO Getting started After charging the battery The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack. To remove the battery pack BATT(battery) release button POWER switch OPEN POWER switch You can check the battery's current charge level and its current remaining recording time both during charging or when the power is turned off. 1 Set the POWER switch to (CHG) OFF. 2 Press OPEN and open the LCD panel. 3 Press DSPL/BATT INFO. The battery information appears for about 7 seconds. Keep the button pressed to view it for about 20 seconds. 1 Set the POWER switch to (CHG) OFF. 2 Lift up the viewfinder. 3 Slide the battery pack out in the direction of the arrow pressing the BATT (battery) release button down. b Note • If you do not use the battery pack for a long time, use up the battery pack completely before storing it. See page 119 about storage of the battery pack. BATTERY INFO BATTERY CHARGE LEVEL 0% 50% 100% REC TIME AVAILABLE LCD SCREEN: 72 min VIEWFINDER: 95 min A Battery charge level: Displays approximate remaining amount of power left in the battery pack. B Approximate possible recording time using the LCD panel. C Approximate possible recording time using the viewfinder. ,continued Getting started 15