Sony HDR-UX20 Operating Guide - Page 22
Step 2: Charging the battery pack
UPC - 027242727731
View all Sony HDR-UX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Step 2: Charging the battery pack POWER switch Battery pack DC IN jack Jack cover DC plug AC Adaptor CHG (charge) lamp To the wall outlet (wall socket) Power cord (Mains lead) You can charge the "InfoLITHIUM" battery pack (H series) (p. 130) after attaching it to your camcorder. b Notes • You cannot attach any "InfoLITHIUM" battery pack other than the H series to your camcorder. 1 Slide the POWER switch in the direction of the arrow to OFF (CHG) (The default setting). 2 Align the terminals of the battery pack and your camcorder (1), then attach the battery pack in the direction of the arrow until it clicks (2). 3 Connect the AC Adaptor to the DC IN jack of your camcorder. Open the jack cover, and connect the DC plug of the AC Adaptor. Make sure that the v mark on the DC plug is facing to the v mark on your camcorder. 4 Connect the power cord (mains lead) to the AC Adaptor and the wall outlet (wall socket). The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery is fully charged. 5 After charging the battery pack, disconnect the AC Adaptor from the DC IN jack on your camcorder. 22