Sony MZ-N1 Operating Instructions - Page 40

Labeling recordings 1 Insert a disc and do the following operations: To label a track Start playing or recording a track you want to label, and label the track while playing or recording operations. To label a group Turn group mode on (page 30) and start playing or recording a track within the group you want to label, and label the group while playing or recording operations. To label a disc If a disc is already recorded, follow the procedures from step 2 while the recorder is stopped. If a disc is new, start recording and label a disc while recording. If you label a disc with group settings, turn group mode on (page 30). 2 Press MENU. 3 Press . or > repeatedly until "EDIT" flashes in the display, and then press ENTER. 4 Press . or > repeatedly until the following item appears in the display, and then press ENTER. When labeling a track "T: Name" When labeling a group "G: Name" When labeling a disc "D: Name" The cursor flashes and the track, group, or disc is ready to be labeled. The disc is ready to be labeled. 5 Press . or > repeatedly to select a letter and press ENTER. The selected letter stops flashing and the cursor moves to the next input position. 40-GB The buttons used for character input and their functions are listed below: Functions Operations To select a character Press . or >. To enter a letter Press ENTER . To enter a name Press ENTER for 2 second or more. To insert a blank space to type in a new letter Press VOL + and END SEARCH at the same time. To delete a letter Press VOL - and and move back all END SEARCH at following letters to the same time. the left To cancel labeling Press CANCEL. 6 Repeat step 5 and enter all characters of the label name. 7 Press ENTER for 2 seconds or more. The track or disc is labeled. To cancel labeling, Press CANCEL in step 6. Notes • When the recording is stopped while labeling a track, a group, or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically. • "LP:" is automatically added at the beginning of the track name for tracks recorded in MDLP mode (page 28). • You cannot label or relabel the premastered disc or blank disc.