Sony MZ-N1 Operating Instructions - Page 41

Relabeling recordings 1 Insert a disc and do the following operations: To relabel a track Start playing a track you want to relabel, and change a track name during playback operation. To relabel a group Turn group mode on (page 30) and start playing or recording a track within the group you want to relabel, and change the group name while playing or recording operations. To relabel a disc If the disc is already recorded, follow the procedures from step 2 while the recorder is stopped. If you relabel a disc with group settings, turn group mode on (page 30). 2 Follow steps 2 to 4 of "Labeling recordings" (page 40) to display a track, group, or disc name. 3 Follow steps 5 to 7 of "Labeling recordings" (page 40), and then keep pressing ENTER for 2 seconds or more. Notes • You cannot relabel premastered MDs. • The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device. To cancel labeling Press CANCEL. Registering tracks or groups as a new group (Group Setting) Do the following procedure to register tracks or groups as a new group. The tracks or groups must, however, be sequential. If the desired tracks or groups are not consecutive, you must move them to make them consecutive before you can register them ("Moving recorded tracks", page 43). The operation of this function depends on whether group mode is on or off. • When group mode is ON: Several groups are registered as one group. • When group mode is OFF: Several tracks are registered as one group. The following section explains the operation when group mode is on. Group Group 123456789 Making a new group with tracks 1 to 3. Group Making a new group with 2 groups. Group 123456789 • Registration of non-consecutive tracks is not possible (for example, track 3 cannot be registered into a group with track 5 to 7). • Tracks always appear according to their order on the disc, not their order within the group (even when group mode is on) • Insert a disc. 41-GB