Sony PEG-N710C Operating Instructions (primary manual) - Page 133
Conducting a HotSync operation via a network, To connect to your company, s dial-in server
View all Sony PEG-N710C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Advanced HotSync® operations Conducting a HotSync operation via a network When you use the Network HotSync application, you can take advantage of the LAN and WAN connectivity available in many office environments. The Network HotSync application enables you to perform a HotSync operation by dialing in to a network or by using a cradle that is connected to any computer on your LAN or WAN (provided that the computer connected to the cradle also has the Network HotSync application installed, your computer is on, and the HotSync Manager is running). To connect to your company's dial-in server The Network HotSync application requires the following: • Your computer has TCP/IP support installed. • Both your company's network system and its remote access server support TCP/IP. • You have a remote access account. Everything you need to connect to your company's dial-in server (network modem) is included in the Palm Desktop for CLIE software and your CLIE handheld. You need to activate certain features, however, on both the Palm Desktop for CLIE software and your CLIE handheld. Preparing your computer 1 Click the HotSync icon in the Windows task tray and then select Network from the shortcut menu. 2 Click the HotSync icon in the Windows task tray again and then select Setup from the shortcut menu. The Setup dialog box is displayed. 3 Click the Network tab and make sure your user name has a check-mark next to it. If the check-mark is not there, click the check box next to your user name. 4 Click OK. Continued on next page Chapter3 Exchanging and updating data using a HotSync® operation 133