Sony PEG-N710C Operating Instructions (primary manual) - Page 197
I cannot perform an IR HotSync operation., My CLIE handheld appears to freeze when I place it near my
View all Sony PEG-N710C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Troubleshooting - Frequently Asked Questions Check the following on your CLIE handheld: , If the telephone line you are using has Call Waiting, make sure you selected the Disable call waiting option under "Modem Sync Phone Setup" on your CLIE handheld and entered the correct code. , Make sure the telephone line you are using is not noisy. This can interrupt communications. , Check the batteries in your modem and replace them if necessary. I cannot perform an IR HotSync operation. , Make sure that the HotSync Manager is running and the Serial Port for local operations is set to the simulated port for infrared communication. , On your CLIE handheld, make sure that the HotSync application is set to IR to a PC/Handheld. , Make sure that the IR port of your CLIE handheld is aligned directly opposite to, and within a few inches of, the infrared device of your computer. , IR HotSync operations do not work after you receive a low battery warning. Check the battery power of your CLIE handheld. Recharge the battery if necessary. , If you have problems using a specific speed, select Prefs, Connection, IR to a PC/Handheld, Edit, and then Details. Then select a lower speed in the Details dialog box. My CLIE handheld appears to freeze when I place it near my computer. , Move your CLIE handheld away from the computer's infrared port. , Make sure that you turn the Beam Receive function off. Continued on next page Chapter6 Additional information 197