Sony STR-DN1010 Operating Instructions - Page 112
Using the Remote, Programming the remote
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Using the Remote Programming the remote You can customize the remote to match the components connected to your receiver. You can even program the remote to control nonSony components and also Sony components that the remote is normally unable to control. Before you begin, note that: - You cannot change the settings of DMPORT input buttons. - The remote can control only components that accept infrared wireless control signals. Be sure to turn on the receiver and point the remote towards the receiver when performing the following procedure. RM SET UP SHIFT AV ?/1 TV Input buttons Numeric buttons ENTER 1 Press and hold RM SET UP, then press AV ?/1. The RM SET UP indicator flashes slowly. 2 Press the input button for the component you want to control. For example, if you are going to control a VCR connected to VIDEO 1 IN, press VIDEO 1. The RM SET UP and SHIFT indicator light up. 3 Press numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control (including TV button). See the tables on page 113-116 for information on the numeric code(s). Note For a TV remote code value, only numbers in the 500's are valid. 4 Press ENTER. Once the numeric code has been verified, the RM SET UP indicator slowly flashes twice and the remote automatically exits the programming mode. 5 Repeat steps 1 to 4 to control other components. Notes • The indicator turns off while a valid button is pressed. • In step 2, if you press TUNER, you can only program the button to control a tuner (page 113). • For the numeric codes, only the last three numbers entered are valid. To cancel programming Press RM SET UP during any step. The RM SET UP indicator flashes 5 times in quick succession. The remote automatically exits the programming mode. To activate the input after programming Press the programmed button to activate the input you want. 112GB