Sony STR-DN1010 Operating Instructions - Page 42
Select the Auto Calibration, Type., Disconnect the optimizer, microphone after you have, finished. - recommended settings
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4 Select the Auto Calibration Type. Press V/v repeatedly to select "Auto Cal. Type", then press . Auto Calibration Auto Cal. Type Full Flat Engineer Front Reference Off RETURN Calibration type and explanation Full Flat Makes the measurement of frequency from each speaker flat. Engineer Sets the frequency to one that matches that of the Sony listening room standard. Front Reference Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. Off Sets the Auto Calibration to off. 5 Disconnect the optimizer microphone after you have finished. Note If you have reposition your speaker, we recommend that you perform Auto Calibration again to enjoy the surround sound. Tip The size of a speaker ("Large"/"Small") is determined by the low frequency characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker Settings menu. Save the measurement results first, then try to change the settings if you want. 42GB