Sony STR-DN1010 Operating Instructions - Page 96
EQ Settings menu, Audio Settings menu
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
EQ Settings menu You can use the following parameters to adjust the tonal quality (bass/trebel level) of front speakers. Bass Treble Level (dB) Frequency (Hz) Notes • This function does not work in the following cases. - Sound Field is set to "Analog Direct". - Signals with a sampling frequency of more than 48 kHz are being received. • If the equalizer is adjusted while the receiver is receiving signals with a sampling frequency of more than 96 kHz, the signals will always be played back at 96 kHz. To adjust the equalizer on the EQ screen 1 Press B/b repeatedly to select "Bass" or "Treble". 2 Press V/v repeatedly to adjust the gain, then press . Audio Settings menu You can make settings for the audio to suit your preference. A/V Sync (Synchronizes audio with video output) Lets you delay the output of audio to minimize the time gap between audio output and visual display. You can adjust the delay from 0 ms to 300 ms in 10 ms steps. Notes • This parameter is useful when you use a large LCD or plasma monitor or a projector. • This function does not work in the following cases. - Sound Field is set to "Analog Direct". - Signals with a sampling frequency of more than 96 kHz are being received. Dual Mono (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources. x Main/Sub Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. x Main Sound of the main language will be output. x Sub Sound of the sub language will be output. 96GB