Sony STR-DN1010 Operating Instructions - Page 39
Setting up the Auto, Calibration, subwoofer - height
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Preparing the Receiver 1: Setting up the Auto Calibration When using surround back speakers On setting up the active subwoofer • When a subwoofer is connected, turn on the subwoofer and turn up the volume beforehand. Turn the MASTER VOLUME to just before the mid-point. • If you connect a subwoofer with a crossover frequency function, set the value to maximum. • If you connect a subwoofer with an auto standby function, set it to off (deactivated). Optimizer microphone When using front high speakers* Note Depending on the characteristics of the subwoofer you are using, the setup distance value may be further away from the actual position. * Be sure to set the speaker pattern setting with front high speakers (page 91). 1 Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 2 Set up the optimizer microphone. Place the optimizer microphone at your listening position. Use a stool or tripod so that the optimizer microphone remains at the same height as your ears. 39GB