Sony STR-DN1010 Operating Instructions - Page 37
Preparing the Receiver, Initializing the receiver, Selecting the front speaker system - a v surround receiver
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Preparing the Receiver Preparing the Receiver Initializing the receiver Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their initial settings. Be sure to use the buttons on the receiver for this operation. ?/1 Selecting the front speaker system You can select the front speakers you want to drive. Be sure to use the buttons on the receiver for this operation. SPEAKERS 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. After "CLEARING" appears on the display for a while, "CLEARED!" appears. All the settings you have changed or adjusted are reset to the initial settings. Press SPEAKERS repeatedly to select the front speaker system you want to drive. To select the front speakers connected to Light up The SPEAKERS FRONT A terminals SP A The SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/ FRONT B terminals SP B* Both the SPEAKERS FRONT A and SPEAKERS SURROUND BACK/ FRONT HIGH/BI-AMP/FRONT B terminals (parallel connection) SP A B* * To select "SP B" or "SP A B", set "SB Assign" to "Speaker B" in the Speaker Settings menu (page 91). To turn off the speaker output Press SPEAKERS repeatedly until the "SP A" and "SP B" indicators on the display do not light up. "SPK OFF" appears on the display. Note You cannot switch the front speaker system by pressing SPEAKERS when the headphones are connected. 37GB