Sony STR-DN1010 Operating Instructions - Page 98
HDMI Settings menu, Comp.Dec. Component video, decoder, Ctrl for HDMI Control for HDMI, Pass Through
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Comp.Dec. (Component video decoder) If the image is distorted when you connect to video game, set "Comp.Dec." to "ON". This setting is only applicable for component video input signals. x ON x OFF HDMI Settings menu You can make the required settings for components connected to the HDMI jack. Ctrl for HDMI (Control for HDMI) Lets you turn the Control for HDMI function on or off. For details, see "Preparing for the "BRAVIA" Sync" (page 70). x ON x OFF Note When you set "Ctrl for HDMI" to "ON", "Audio Out" may be changed automatically. Pass Through Lets you output the HDMI signals to the TV even when the receiver is in standby mode. x ON When the receiver is in the standby mode, the receiver continuously outputs HDMI signals from the receiver's HDMI TV OUT jack. x AUTO When the TV is turned on while the receiver is in the standby mode, the receiver outputs HDMI signals from the receiver's HDMI TV OUT jack. Sony recommends this setting if you use a TV that is compatible with "BRAVIA" Sync. This setting saves power in the standby mode compared with the "ON" setting. x OFF The receiver does not output HDMI signals when in the standby mode. Turn on the receiver to enjoy the connected component's source on the TV. This setting saves power in the standby mode compared with the "ON" setting. 98GB