Sony STR-DN1010 Operating Instructions - Page 81
Changing the channel for better sound transmission, To control the system from the, S-AIR receiver
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
8 Select the desired input on the S-AIR receiver. x When "Party" is set The S-AIR receiver's input changes sequentially as you change the input on the S-AIR main unit or S-AIR receiver. x When "Separate" is set The S-AIR receiver's input changes by pressing S-AIR CH of the S-AIR receiver. Note When TUNER (FM/AM band) is selected on the S-AIR main unit, you can only select the same band for the tuner on the S-AIR receiver. However, you can select input other than TUNER on the S-AIR receiver. 9 Adjust the volume on the S-AIR receiver. * Models of area code U2, CA2 only. Notes • The sound of the S-AIR receiver may be cut off by operation of the S-AIR main unit. • When the sound is other than 2 channel stereo, multi channel sound is downmixed to 2 channel. • Signals with a sampling frequency of more than 96 kHz cannot output to the S-AIR receiver. To control the system from the S-AIR receiver You can control the system from the S-AIR receiver by using the following buttons. Press N, X, x, ./> S-AIR CH Operation Share the same operations on the remote Change the function of the system For details, refer to the operating instructions of the S-AIR receiver. Changing the channel for better sound transmission If you use multiple wireless systems which share the 2.4 GHz band, such as wireless LAN or Bluetooth, the transmission of S-AIR products or other wireless systems may be unstable. In this case, transmission may be improved by changing the "RF Change" setting. GUI MODE V/v/b, MENU 1 Press GUI MODE. After "MENU ON" appears on the display for a while, "GUI" appears and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 2 Press V/v repeatedly to select "Settings", then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select "S-AIR", then press or b. Note When the S-AIR transmitter (not supplied) is not inserted into the S-AIR main unit, "S-AIR" cannot be selected. S-AIR Operations continued 81GB