Sony STR-DN1010 Operating Instructions - Page 52
Using the Sleep Timer, Recording using the receiver, Recording onto a CD-R
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. AMP Recording using the receiver You can record from a video/audio component using the receiver. Refer to the operating instructions supplied with your recording component. SLEEP Press AMP, then press SLEEP repeatedly while the power is on. "SLEEP" lights up on the display. Each time you press the button, the display changes cyclically as follows: 0:30:00 t 1:00:00 t 1:30:00 t 2:00:00 t OFF Recording onto a CD-R You can record onto a CD-R using the receiver. Refer to the operating instructions supplied with your CD recorder. 1 Press one of the input buttons to select the playback component. You can also use INPUT SELECTOR +/- on the receiver. 2 Prepare the playback component for playing. For example, tune to the radio station you want to record (page 53). 3 Prepare the recording component. Insert a blank CD-R into the CD recorder and adjust the recording level. 4 Start recording on the recording component, then start playback on the playback component. Note Sound adjustments do not affect the signal output from the SA-CD/CD/CD-R AUDIO OUT jacks. Tip To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the Sleep Timer will be canceled. 52GB