Sony STR-DN1010 Operating Instructions - Page 92
Manual Setup, To adjust the speaker level, To adjust the distance from the, seating position to each
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
• OFF If you do not use "Speaker B" or "BI-AMP", select "OFF". Note Set "SB Assign" to "OFF", then connect the surround back speakers to this receiver when you want to change the connection from a bi-amplifier connection or speakers front B connection to a surround back speakers connection. Re-set up the speakers after you connect the surround back speakers. See "Calibrating the appropriate speaker settings automatically (Auto Calibration)" (page 38). Manual Setup You can adjust each speaker manually on the "Manual Setup" screen. You can also adjust the speaker levels after the Auto Calibration is completed. To adjust the speaker level You can adjust each speaker's level (front left/ right, front left/right high, center, surround left/right, surround back left/right, subwoofer). 1 Press V/v/B/b repeatedly to select the speaker on the screen for which you want to adjust the level, then press . 2 Press B/b repeatedly to select "Lvl:". 3 Press V/v repeatedly to set the level of the selected speaker, then press . For front left/right speakers, you can adjust the level from -10.0 dB to +10.0 dB in 0.5 dB steps. For other speakers, you can adjust the level from -20.0 dB to +10.0 dB in 0.5 dB steps. Note When one of the sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to "Large". However, the sound will be output from the subwoofer if - the digital input signal contains LFE signals. - the front or surround speakers are set to "Small". - the sound field for movie is selected. - "Portable Audio" is selected. 92GB To adjust the distance from the seating position to each speaker You can adjust the distance from the listening position to each speaker (front left/right, front left/right high, center, surround left/right, surround back left/right, subwoofer). 1 Press V/v/B/b repeatedly to select the speaker on the screen for which you want to adjust the distance from the seating position, then press . 2 Press B/b repeatedly to select "Dist:". 3 Press V/v repeatedly to set the distance of the selected speaker, then press . You can adjust the distance from 3 feet 3 inches to 32 feet 9 inches (1.00 meter to 10.00 meters) in 1 inch (0.01 meter) steps. Notes • Depending on the speaker pattern setting, some parameters may not be available. • This function does not work in the following cases. - Sound Field is set to "Analog Direct". - Signals with a sampling frequency of more than 96 kHz are being received. To adjust the size of each speaker You can adjust each speaker's (front left/right, front left/right high, center, surround left/right, surround back left/right) size. 1 Press V/v/B/b repeatedly to select the speaker on the screen for which you want to adjust the size, then press . 2 Press B/b repeatedly to select "Size:".