Symantec 360R Administration Guide - Page 100

100 Establishing secure VPN connections Configuring Client-to-Gateway VPN tunnels ■ Enable client VPNs on WAN side ■ Enable client VPNs on WLAN/LAN side 4 Optionally, under VPN Network Parameters, in the Primary DNS text box, type the name of the primary DNS server. 5 Optionally, in the Secondary DNS text box, type the name of the secondary DNS server. Domain Name System or Service (DNS) is an Internet service that translates domain names into IP addresses. 6 Optionally, in the Primary WINS text box, type the name of the primary WINS server. This is an optional step.Windows Internet Naming Service (WINS) is a system that determines the IP address associated with a particular network computer. 7 Optionally, in the Secondary WINS text box, type the name of the secondary WINS server. 8 Optionally, in the Primary Domain Controller text box, type the name of the primary domain controller. 9 (Optional) Under Extended User Authentication, check Enable Extended User Authentication. 10 (Optional) In the RADIUS Group Binding text box, type the RADIUS Group Binding name. The RADIUS Group Binding name must match the filter ID parameter returned from the RADIUS server. 11 To enable AVpe, under WAN Client Policy, do the following: ■ Check Enable Antivirus Policy Enforcement. ■ To log a warning to the Symantec Gateway Security log that a user is connecting that is not compliant with AVpe policy, click Warn Only. ■ To stop the user's traffic if they are not compliant with the AVpe policy, click Block Connections. 12 To enable content filtering, under WAN Client Policy, do the following: ■ Check Enable Content Filtering. ■ To permit traffic and block other traffic, click Use Allow List. ■ To block traffic and permit other traffic, click Use Deny List. 13 Click Update.