Symantec 360R Administration Guide - Page 164

164 Field descriptions WAN/ISP field descriptions Main Setup tab field descriptions On the Main Setup tab, you select your connection type and configure the security gateway's identification settings. Table C-10 Main Setup tab field descriptions Section Fields Description Model 320: Connection Type Model 360/360R: WAN1 (External) or WAN2 (External) Connection Type The following connection types are supported: ■ DHCP (Auto IP) Your ISP assigns you an IP address automatically each time you connect. ■ PPPoE Point-to-Point Protocol over Ethernet (PPPoE) is a specification for connecting the users on an Ethernet LAN to the Internet. ■ Analog or ISDN Dial-up account. ■ Static IP Your ISP assigns or you have purchased a permanent IP address. ■ PPTP Your ISP uses Point-to-Point Tunneling Protocol (PPTP). HA Mode (Model 360/360R) The following high availability modes are available for the WAN ports: ■ Normal Load balancing settings apply to the port when it is enabled and operational. ■ Off WAN port is not used at all. ■ Backup WAN port only passes traffic if the other WAN port is not functioning. Alive Indicator Server (Model 360/360R) URL for a site to which the security gateway sends a PING or echo request to test for connectivity. If you do not specify a URL, the security gateway uses the address of the default gateway.