Symantec 360R Administration Guide - Page 171

Field descriptions 171 WAN/ISP field descriptions PPTP tab field descriptions Configure the security gateway to connect to the Internet with an account that uses PPTP for authentication. Table C-14 PPTP tab field descriptions Section Field Description WAN Port: Model WAN Port(Model WAN port for which you are configuring PPTP. 360/360R 360/360R) Connection Connect on Demand When enabled, a connection is established only when a request is made, such as when a user browses to a Web page. Idle Time-out Number of minutes that the connection can remain idle (unused) before disconnecting. Type 0 to keep the connection always on and to prevent the security gateway from disconnecting. For values greater than 0, check Connect on Demand to reconnect automatically when needed. Server IP Address IP address of the PPTP server. The default value for the first octet is 10. The default value for the last octet is 138. Static IP Address Only for static PPTP accounts. The static IP address for your account if you purchased one from, or are assigned one by, your ISP. User Information User Name User name for your PPTP account. Password Password for your PPTP account. Verify Password Retype the password for your PPTP account. Manual Control Connect Opens a connection to your PPTP account. Disconnect Closes an open connection the PPTP account. Dynamic DNS tab field descriptions Dynamic DNS services let you use your own domain name (mysite.com, for example) or to use their domain name and your subdomain to connect to your services, such as a a VPN gateway, Web site or FTP. For example, if you set up a