Symantec 360R Administration Guide - Page 131
Running LiveUpdate Now, Run LiveUpdate Now is the manual LiveUpdate feature. Run LiveUpdate Now
UPC - 037648240185
View all Symantec 360R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Logging, monitoring and updates 131 Updating firmware Figure 9-5 shows the rear panel of models 360 and 360R. This graphic is for reference; the full description ofeach feature is available in the Symantec Gateway Security 300 Series Installation Guide. Figure 9-3 Model 360 and 360R rear panel To flash the firmware 1 To turn off the power, press the power button on the back panel of the appliance. 2 Turn DIP switches 1 and 2 (4) to the on (up) position. 3 To turn on the power, press the power button (7). 4 Copy the firmware file and the symcftpw utility into a temporary folder on your hard drive. 5 Double-click the symcftpw icon. 6 In the Server IP text box, type the IP address of the appliance. The default IP address of the appliance is 192.168.0.1. 7 In the Local File text box, type a file name for the firmware upgrade file. 8 Click Put. Wait several minutes before restarting the appliance. Flashing is complete when symcftpw reports that flashing is complete, LEDs 2 and 3 stop flashing alternately, the appliance has restarted, and then LEDs 1 and 3 are illuminated steadily. This may take several minutes. 9 Turn DIP switches 1 and 2 (4) to the off position (down). Running LiveUpdate Now Run LiveUpdate Now is the manual LiveUpdate feature. Run LiveUpdate Now immediately checks for the latest firmware updates for your appliance and installs it. If you are already running the latest version, it does not update your appliance. LiveUpdate updates retain your configuration.