Symantec 360R Administration Guide - Page 138

138 Logging, monitoring and updates Interpreting LEDs Table 9-2 LEDs Location Symbol 2 Feature Error Description Illuminates if there is a problem with the appliance. 3 Transmit Illuminates or flashes when traffic is being passed over the LAN or WAN ports. 4 Backup Illuminates or flashes when the serial port is being used or is not functioning correctly. 5 Wireless- Illuminates when the wireless card is ready inserted and functioning properly. 6 Wireless- Illuminates or flashes when the wireless active card is transmitting or receiving data. The LEDs on the front panel of the appliance have three states: solid on, flashing, and solid off. The combination of the Error and Transmit LED states indicate the status of the appliance. Table 9-3 describes the LEDs state combinations and appliance status that they indicate. Table 9-3 LEDs states and appliance status Error LED (2) state Transmit LED (3) state Appliance status Solid off Solid off Flashing Solid on Flashing Flashing Flashing Solid on Normal operation. Transmitting/receiving Data from LAN. ■ MAC address not assigned. ■ Firmware problem. Appliance is ready for a forced download. ■ Appliance detected an error and cannot recover. Configuration mode.